How to install insulation piercing connector

Date:2018-10-10 11:09:42 click:2192

CONWELL- How to install insulation piercing connector

1.Adjust the IPC connector nut to suitable location.

2.Put the branch wire in to the piercing connector cap sheath fully.

3.Insert the main wire, if there are two lays of insulated lay in the main cable, should strip a certain length of the first insulated lay from inserted end.

4.Turn the nut by hand, and fix the  connector in suitable location.

5.Screw the nut with the sleeve spanner.

6.Screw the nut continually until the top part is cracked and dropped down.

/Upload/2018-10-05/0ae7da24ef71b6c88895a6bfca89c364-[高质量和大小]-172534.flv